• Yamaha Pro Pack, SBVTools tool roll with digital torque adapter
  • The Yamaha Motorcycle Tool Set that forms the base of the Pro Pack
  • The Basic Motorcycle Tool Set, the base layer shared by every SBV kit
  • The Yamaha Add-On Pouch, three black mesh pouches that attach to the roll
  • The tool set rolled up in its black outer shell with the SBV logo
  • The Digital Torque Adapter, what makes this a Pro Pack
  • The Digital Torque Adapter mounted on a ratchet, ready to torque a fastener
  • Every tool in the Yamaha motorcycle tool set laid out flat
  • Ratcheting spanner and socket, shown through its range of movement
  • MIT socket profile: star, square, metric and SAE in one socket
  • 3-in-1 multi-tool T-handle from the Yamaha set
  • T-handle and extension configurations
  • 27mm aluminium socket from the Yamaha set
  • 22mm MIT socket from the Yamaha set
  • Extension and ratchet combinations for extra torque
  • Poplock extension and socket being connected by hand

Yamaha Pro Pack

Yamaha Pro Pack

$459.00
$459.00
SAVE Sold out
Ships next business day from Utah
Yamaha Pro Pack, SBVTools tool roll with digital torque adapter

Yamaha Pro Pack

$459.00
$459.00
SAVE Sold out

Everything in the Yamaha Motorcycle Tool Set, plus the Digital Torque Adapter, so you can tighten every bolt to the exact torque spec.

What's included

Basic Motorcycle Tool Set (52501)
  • 3-in-1 Multi-tool "T-handle | 1/4" Dr. Hex bit ratchet | 11mm ratchet"
  • 1/4" Hex bit lock "Turbo sleeve" extension with 1/4" to 1/4" adapter
  • 1/4" Bits: T8, T10, T15, T20, T25, T27, T30, T40, T45, T50, PH3, Slot 5.5
  • 1/4" Bits: H1.5, H2, H2.5, H3, H4, H5, H5.5, H6, H7, H8, H10, PH2
  • 1/4" Dr. MIT sockets: 6mm (E8), 8mm (E10), 10mm (E12), 11mm (E14), 12mm
  • 3/8" Dr. MIT sockets: 13, 14, 15, 17mm
  • 3/8" Dr. Spark plug sockets: 14 & 16mm
  • 3/8" Dr. 125mm PopLock® extension with outer Hex 16mm
  • 8, 12, 14, 16mm Open end ring spanners, MIT on ring side
  • 10 x 11mm Open end spanner
  • 13mm Open end ratchet spanner with 3/8" locking socket adapter
  • Tire gauge "small pen type" 0.4 to 3.5Kg & 5 to 50Psi
  • Plier cutting long nose vise grip 169mm
  • Cable ties x 10 pcs
  • Socket holder 5 x 1/4" & 4 x 3/8"
  • 600 Den double layer Tetoron pouch bag
Yamaha Add-On Pouch (52534)
  • 3/8" Dr. MIT socket: 22mm
  • 3/8" Dr. Aluminum socket: 27mm (max 180 Nm)
  • 3/8" Dr. 14mm stubby Hex bit socket
  • 3/8" Dr. Aluminum Hex axle tool 17-22mm/24-19mm (max 120 Nm)
  • 3/8" Dr. 72-Tooth Super Light Ratchet
  • 3/8" Dr. Heavy duty magnetic locking 1/4" bits socket
  • 17mm Open end ring spanners, MIT on ring side
  • 19mm Open end ring spanners, MIT on ring side
  • 600 Den double-layer Tetoron Add-On Pouch
  • 210 Den water-resistant nylon bag (7.4 in x 15 in)
Digital Torque Adapter (52620)
  • 3/8" Dr. Digital Torque Adapter, 0.74 to 151 ft-lb (1 to 205 Nm), both directions
  • 1/4" adapter, certificate of calibration and a molded carry case

Specs: bits hardened to HRC 56-60 with a manganese phosphate anti-rust finish. Sockets and spanners in Cr-V steel, satin chrome plated.

Fits

Model Year
XSR125 2021 to present
YZF-R125 2008 to present
WR250R/WR250X 2008 to 2020
MT-03 2016 to present
R3 2015 to present
TMAX 530/560 2012 to present
XT660Z Tenere 2008 to 2016
MT-07/FZ-07/XSR700 2014 to present
Tracer 700 2016 to 2020
Tenere 700 2019 to present
R7 2022 to present
MT-09/FZ-09/XSR900 2014 to present
Tracer 900/9 GT 2015 to present
FJ09 2015 to 2017 USA
Bolt 950 2013 to present

For rear axle removal and the larger axle nut, these models need the 3/8" Dr. 24mm 6-point Socket and the 1/2" Dr. Aluminum Socket, 36mm 12-Point.

Model Year
Yamaha Super Tenere 1200 2010 to 2022

Weight: 5 lb 15 oz (2.7 kg), the roll plus the adapter
Open: W 49 x H 26.5cm / W 19.29" x H 10.43"
Rolled: Ø 10 x H 26.5cm / Ø 3.93" x H 10.43"

Made in: Taiwan, start to finish.

For service and repairs, in the garage or roadside.

Not in this roll, and needed for some models:

Riding Super Tenere 1200?

Your model needs the 24mm 6-Point Socket for rear axle removal.

Riding Super Tenere 1200?

Your model needs the 36mm ALU Socket for the larger axle nut.

View full details